The P-2500 is an integrally geared pump that is capable of generating high pressure quickly for plant operators who require on demand liquids for wash down, boiler feed, reverse osmosis or mineral processing. Sunflo pumps utilize high-speed to keep the motor size low resulting in energy savings and increased efficiency.
- Flows to 180 gpm (41 m³/hr)
- Heads to 2,600 ft (792 m)
The P-2500 is designed to deliver maximized up-time, reduced maintenance costs and optimized productivity over the lifecycle of the unit. Sunflo pumps are simple to maintain and can be overhauled in minutes without having to remove the pump casing from the baseplate.
Proven to be reliable, cost effective and easy to maintain, Sunflo industrial grade pumps provide a number of operational benefits:
- Single stage, integrally geared pump
- Maintain with a shaft and impeller insert
- Operator does not need to stock spare pumps
- Maximized up time
- Saves space-25% the size of competing horizontal pumps
- Start and stop the pumps quickly for on demand water operations
- Generates high pressure quickly for water applications
US 60 Hz
- Heads to                          2,600 ft
- Flows to                          180 gpm
- Maximum Motor Power              75 HP
- Temperature Range                 -50 to 300°F
- Maximum Case Working Pressure      1,440 psi
- Maximum Suction Pressure           250 psi
- Maximum Viscosity                  10 cp
- Solids Range                      0.015″, 400 microns
- Mounting Configuration              Vertical, Horizontal
- Seal Configurations                 Single, Double, Tandem
- Available Inducer                   Yes
- Available Flanges           NPT, 300# RF, 600# RF
- Suction and Discharge Size      2″ x 1.5″
- Seal Plans              11, 13, 21, 23, 31, 32, 41, 52, 53
Metric 50 Hz
- Heads to                          554 m
- Flows to                          40 m3/hr
- Maximum Motor Power              55 kW
- Temperature Range                 -50 to 300°C
- Maximum Case Working Pressure     105 kg/cm2
- Maximum Suction Pressure           18 kg/cm²
- Maximum Viscosity                 10 cp
- Solids Range                      0.381mm, 400 microns
- Mounting Configuration              Vertical, Horizontal
- Seal Configurations                 Single, Double, Tandem
- Available Inducer                   Yes
- Available Flanges           NPT, 300# RF, 600# RF
- Suction and Discharge Size      2″ x 1.5″
- Seal Plans              11, 13, 21, 23, 31, 32, 41, 52, 53
316 Stainless Steel (Duplex SS)
Hastelloy
AISI 4140/8620/9310 Steel
Aluminum
Cast Steel
Sunflo SundWASH High-Pressure Washdown System Brochure, A4 – PDF