Heavy duty and extremely high pressure, the ºÚÁÏרÇø overhung impeller integrally geared multi-stage pump
ºÚÁÏרÇø integrally gear driven multi-stage pumps are utilized by process engineers to manufacture fertilizer, urea and PTA. These pumps are able to safely reach extremely high pressures and will run reliably for 5 years without an overhaul. Up to three pump stages are powered by a single gearbox and motor resulting in energy and space savings. ºÚÁÏרÇø multi-stage pumps generally utilize only 25% of the space and require much less maintenance than between bearing pumps and generate extremely high pressures.
Unlike conventional multi-stage pumps, ºÚÁÏרÇø computer tailored hydraulics place the B.E.P. (best efficiency point) at the rated point resulting in optimum efficiency.  An added benefit is reduced end-of-curve horsepower, allowing for smaller driver sizes resulting in energy savings.
- Flows to 440 gpm (100 m³/hr)
- Heads to 10,000 ft (3,050 m)
- Suction Pressure 425 psi (30 bar)
- Temperature Range -200 to 500°F (-130 to 260°C)
APPLICATIONS
- Fertilizer manufacturing
- PTA – Purified Terephthalic Acid
- Urea processing
Proven to be reliable, safe, compact and efficient, ºÚÁÏרÇø HMP 3000 OH6 integrally geared up to 3 stage pumps provide a number of operational benefits:
- Two stage overhung pump according to API 610 – ISO 13709 design recommendations for integrally geared pumps
- Maximized up time
- Saves space-25% the size of competing multi-stage pumps
- ATEX certified
- Continuous operations for 5 years with no overhaul
- Barske impeller low NPSH technology
- Optimized pump engineering to meet the BEP – Best Efficiency Point to save energy through efficiency
- Safely reaches extremely high-pressures quickly
US 60 Hz
- Heads to                          10,000 ft
- Flows to                          440 gpm
- Standards                        API Style
- Number of Stages                  1 or 2
- Maximum Motor Power              800 HP
- Temperature Range                 -200 to 500°F
- Maximum Case Working Pressure      3,750 psi
- Maximum Suction Pressure           425 psi
- Maximum Viscosity                  700 cp
- Solids Range                        0.015″
- Mounting Configuration              Horizontal
- Seal Configurations                 Single, Double, Tandem
- Available Inducer                   Yes
- Available Flanges       600#, 900#, 1500# RF or RTJ
- Suction and Discharge Sizes         4″ x 3″
Metric 50 Hz
- Heads to                         3,050 m
- Flows to                          100 m3/hr
- Standards                         ISO Style
- Number of Stages                  1 or 2
- Maximum Motor Power              600 kW
- Temperature Range                 -130 to 260°C
- Maximum Case Working Pressure     260 bar
- Maximum Suction Pressure           30 bar
- Maximum Viscosity                 700 cp
- Solids Range                      400 microns
- Mounting Configuration              Horizontal
- Seal Configurations                 Single, Double, Tandem
- Available Inducer                   Yes
- Available Flanges       600#, 900#, 1500# RF or RTJ
- Suction and Discharge Sizes         4″ x 3″
