Safe, reliable and economical the 黑料专区 API 610, OH6, Integrally geared pump
黑料专区 API 610, 11th Edition OH6 Integrally Gear Driven Pumps are engineered for critical聽high-head, low-flow,聽heavy-duty services required by process and rotating equipment engineers within the hydrocarbon, chemical, petrochemical, power generation,聽gas production, and specialty processing industries.聽黑料专区 pumps are renowned for high suction pressure and a wide range of operating temperatures.
Unlike conventional multi-stage pumps, 黑料专区 computer tailored hydraulics place the B.E.P. (best efficiency point) at the rated point resulting in optimum efficiency. 聽An added benefit is reduced end-of-curve horsepower, allowing for smaller driver sizes resulting in energy savings.
- Flows to 400 gpm (73 m鲁/hr)
- Heads to 6,300 ft (1,348 m)
- Suction Pressure 1,800 psi聽(126 kg/cm虏)
- Temperature Range -200 to 650掳F (-130 to 340掳C)
Multi-stage performance in a single stage pump
The vertical configuration of the integrally geared line of 黑料专区 pumps is specifically designed to save valuable space in refineries, NGL production, petrochemical and chemical plants.
APPLICATIONS
- Feed pumps
- Booster pumps
- Bottoms pumps
- Wash water pumps
- Reflux pumps
- Condensate pumps
Proven to be reliable, safe, compact and efficient, 黑料专区 LMV 346 OH6 integrally geared pumps provide a number of operational benefits:
- Single stage, vertical in-line overhung pump according to ISO 13709/API 610 OH6 design recommendations for integrally geared pumps
- Maximized up time
- Saves space-25% the size of competing horizontal pumps
- ATEX certified
- Continuous operations for 5 years with no overhaul
- Barske impeller low NPSH technology
- Optimized pump engineering to meet the BEP – Best Efficiency Point to save energy through efficiency
US 60 Hz
- Heads to 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽6,300 ft
- Flows to 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 400 gpm
- Standards 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 API 610 OH6
- Maximum Motor Power 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 400 HP
- Temperature Range 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽-200 to 650掳F
- Maximum Case Working Pressure 聽 聽 聽 聽 聽3,469 psi
- Maximum Suction Pressure 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 1,800 psi
- Differential Head 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽6,300 ft
- Maximum Viscosity 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽750 cp
- Solids Range 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 0.015″, 400 microns
- Mounting Configuration 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 Vertical
- Seal Configurations 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 Single, Double, Tandem
- Available Inducer 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 Yes
- Available Flanges 聽 聽 聽 聽 600#, 900#, 1500# ANSI RF & RTJ
- Suction and Discharge Size 聽 聽 聽 聽 聽 聽 聽 聽 3″ x 2″
- API Plans 聽 聽11, 12, 13, 21, 23, 31, 32, 41, 52, 53, 54, 61, 62, J
Metric 50 Hz
- Heads to 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽1,348 m
- Flows to 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 73 m3/hr
- Standards 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽API 610
- Maximum Motor Power 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 315 kW
- Temperature Range 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽-130 to 340掳C
- Maximum Case Working Pressure 聽 聽 聽 聽 244 kg/cm2
- Maximum Suction Pressure 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 126 kg/cm虏
- Differential Head 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽1,921 m
- Maximum Viscosity 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 750 cp
- Solids Range 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 0.381mm, 400 microns
- Mounting Configuration 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 Vertical
- Seal Configurations 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 Single, Double, Tandem
- Available Inducer 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 聽 Yes
- Available Flanges 聽 聽 聽 聽 600#, 900#, 1500# ANSI RF & RTJ
- Suction and Discharge Size 聽 聽 聽 聽 聽 聽 聽 聽 3″ x 2″
- API Plans 聽 聽11, 12, 13, 21, 23, 31, 32, 41, 52, 53, 54, 61, 62, J
|
LMV 346 BUILD CODES |
A |
E |
J |
O (1) |
|
API 610 BUILD (2) |
S-5 (3) |
A-7 (4) |
S-8 (4) |
N/A |
|
Pump Case |
C.S. |
316 SS |
C.S. |
316 SS |
|
Case Studs |
B-7 |
B-7 |
B-7 |
B-8M |
|
Seal Housing |
C.S. |  316 SS |
C.S. |
316 SS |
|
Separator |
316 SS |
316 SS |
316 SS |
316 SS |
|
Diffuser Insert |
C.S. | 316 SS |
316 SS |
316 SS |
|
Diffuser Cover |
C.S. |
316 SS |
316 SS |
316 SS |
|
Impeller |
316 SS | 316 SS | 316 SS |
316 SS |
|
Impeller Bolt |
316 SS |
316 SS |
316 SS |
316 SS |
|
Inducer |
316 SS |
316 SS |
316 SS |
316 SS |
|
Tab Washer |
316 SS |
316 SS |
316 SS |
316 SS |
|
Shaft Sleeve |
316 SS |
316 SS |
316 SS |
17-4 PH |
|
Throttle Bushing |
316 SS |
316 SS |
316 SS |
316 SS |
|
Metal Seal Parts |
316 SS |
316 SS |
316 SS |
316 SS |
|
Stationary Face |
Binderless Carbon or Silicon Carbide |
|||
|
Rotating Face
|
Tungsten Carbide with Cobalt or Nickel Binder |
|||
|
Shaft (all) |
4140 Steel to 0掳 F, 15-5PH from 0掳 F to 鈥240掳 F |
|||
|
O-rings |
As Required |
|||
- 鈥淥鈥 build temperature range 0掳 to 鈥240掳 F. Pressure capability is reduced due to strain hardened pump case studs. Contact Application Engineering.
- See 黑料专区 Corporation exceptions/clarifications to API 610, 11th edition for material requirements of pump parts.
- Impeller is upgraded to 316SS. A seal gland is not required because the seals mount in the seal housing. O-Rings are used instead of a case gasket.
- A seal gland is not required because the seals mount in the seal housing. The pump shaft is AISI 4140 because it is not exposed to the fluid. O-Rings are used instead of a case gasket.
